Product Description
The Isotech Small Hotplate is a lightweight portable calibration system purpose designed for surface mounted sensors. The flat surface plate is made from precision-machined aluminum. The sensor to be tested is simply placed on the surface, for higher accuracy a calibrated surface sensor can be placed alongside and the two compared.
Good thermal contact is ensured by the flat disk that is recessed to allow the optional use of a heat transfer paste or fluid. Uniform heat distribution is achieved with a flat spiral heater clamped to an integrating block below the surface of the plate. The typical accuracy that can be achieved 1°C but this will be influenced by the type of sensor to be calibrated.
The internal control sensor is located immediately below the plate’s surface.
A protective cover that can fit over the block is included along with a comprehensive handbook.
The temperature range is from 35°C to 350°C, which is set by an advanced, but easy to use temperature controller.
The controller has 0.01 resolution below 100°C (0.1° above 100°). A PC interface is included as standard along with an RS232 converter lead and Windows software.
Tech Spec
| TECHNICAL FEATURE | VALUE |
|---|---|
| Model | 983 Small Hot Plate |
| Temperature Range | 35°C to 350°C |
| Stabilisation Time | 10 minutes |
| Cools from | 350°C to 100°C in 125 minutes |
| Heats from | 50°C to 350°C in 20 minutes |
| Uncertainties | Dependant on sensors and method of use 1°C typical |
| Calibration Volume | Flat Plate 71mm diameter |
| Display Resolution | 0.01 to 99.99, 0.1 100 to 350.0 PC can display 0.01 across whole range with the software included |
| Units | °C, °F, K |
| Power | 100 to 115V (50/60Hz) or 200 to 230V (50/60 Hz) 200 Watts |
| Dimensions | Height 115mm Width 230mm Depth 225mm |
| Weight | 3.9kg |
| How to order | 983 Small Hot Plate: Please specify voltage required. |
Downloads
- Açıklama
Product Description
The Isotech Small Hotplate is a lightweight portable calibration system purpose designed for surface mounted sensors. The flat surface plate is made from precision-machined aluminum. The sensor to be tested is simply placed on the surface, for higher accuracy a calibrated surface sensor can be placed alongside and the two compared.
Good thermal contact is ensured by the flat disk that is recessed to allow the optional use of a heat transfer paste or fluid. Uniform heat distribution is achieved with a flat spiral heater clamped to an integrating block below the surface of the plate. The typical accuracy that can be achieved 1°C but this will be influenced by the type of sensor to be calibrated.
The internal control sensor is located immediately below the plate’s surface.
A protective cover that can fit over the block is included along with a comprehensive handbook.
The temperature range is from 35°C to 350°C, which is set by an advanced, but easy to use temperature controller.
The controller has 0.01 resolution below 100°C (0.1° above 100°). A PC interface is included as standard along with an RS232 converter lead and Windows software.
Tech Spec
TECHNICAL FEATURE VALUE Model 983 Small Hot Plate Temperature Range 35°C to 350°C Stabilisation Time 10 minutes Cools from 350°C to 100°C in 125 minutes Heats from 50°C to 350°C in 20 minutes Uncertainties Dependant on sensors and method of use 1°C typical Calibration Volume Flat Plate 71mm diameter Display Resolution 0.01 to 99.99, 0.1 100 to 350.0 PC can display 0.01 across whole range with the software included Units °C, °F, K Power 100 to 115V (50/60Hz) or 200 to 230V (50/60 Hz) 200 Watts Dimensions Height 115mm Width 230mm Depth 225mm Weight 3.9kg How to order 983 Small Hot Plate: Please specify voltage required. Downloads
