Microtest 6377
362375
Microtest 6377 Impedance Analyzer
Microtest 6377 Impedance Analyzer
0.00

Product Description:

The 6377 LCR Meter that is provided with high accuracy and speed. It is a cost and multiple- function utility and is able to perform the component test entirely. 6377 can collocate with DC Bias. The friendly operation interface design is in synchronization with the international trend and easy to operate to import into the production lines quickly. Synchronous tests with multiple parameter settings. Because of the high-precision values of measured data and superior efficacy, it must be a necessary testing instrument of components and materials. It supports the interfaces of RS232, LAN, USB and GPIB PC connections.

  • Basic accuracy up to 0.1%
  • Synchronous tests with multiple parameter settings
  • Graphic scanning analysis function
  • Measurement of wide range of functions: Freq. to 5 Digits, signal level of 10mV to 2Vrms
  • Collocating DC Bias to progressing current scanning analysis
  • Fixture design capabilities, Specific customized services for clients
  • Optional Meter Link automatic test software exclusively for LCR power meter series to achieve fast electronic management

Product Specification:

Measurement Data

   
Test Frequency 20Hz-1MHz
Points Of Test Frequency Continuity
Basic Accuracy ± 0.1%
AC Drive  Level 10mV to 2Vrms (1m Vrms steps)
DC Drive  Level 0.01V~2V
Output Impedance 100Ω
Frequency trimming resolution 5 Digits
Frequency output accuracy ± 0.01%
AC test speed (Max.) 75mS
AC test speed (Fast) 150mS
AC test speed (Medium) 450mS
AC test speed (Slow) 600mS
DC test speed (Max.) 30mS
DC test speed (Fast) 60mS
DC test speed  (Medium) 120mS
DC test speed  (Slow) 500mS
DC Bias Current Source Option (Model 6220)

Specifications

   
Measured Value Detection Mode Define upper and lower thresholds according to main and sub parameters
ESR Series/Parallel
Mathematical Mode Absolute/Percentage
Test Range Automatic/Lock
Indicator Pass/Fail/Bias LED and Built-in speaker
Output Terminal BNC connector
Safety EN61010-1
Immunity EN61326-1
Emissions EN55022 Class A
Calibration Open Circuit / Short Circuit: Avoid the misreading caused by the stray capacitance from kelvin clips and fixtures
Auto-save when power-off function When the power is turned off or encounter a power outage, all the data will be saved automatically and recovered when tester system is switched on again
Power Supply Voltage 90-132Vac or 198-264Vac (selectable)
  Frequency 47 ~ 63Hz
Display 320*240 dot-matrix display
Interface RS-232, GPIB (option), Handler (option)
Flash Memory Built-in flash for storage of 64 groups of Multi-steps setting (Each group contains up to 30 steps)
Operation Auto、Manual、RS-232、GPIB (option)、Handler (option)
Environment Temperature : 10°C to 40°C Humidity : 20 ~ 90%
Dimension (W*H*D) 340x133x525 mm
Weight 6.5 Kg

Parameters Measurement Ranges

   
|Z| R X 0.1 mΩ – 100MΩ
|Y| G B 10nS – 1000S
Cs Cp 0.01pF – >1F
Ls Lp 0.01nH – 100KH
D 0.00001 – 9.9999
Q 0.1 – 9999.9
DCR 0.1mΩ – 100MΩ
Δ% -999.99% – 999.99%
Θ -180° – +180°

Applications

Resistance, Capacitance, Inductance, Oscillators, Sensors, Delay Line, Filters, Resonators

  • Açıklama
    • Product Description:

      The 6377 LCR Meter that is provided with high accuracy and speed. It is a cost and multiple- function utility and is able to perform the component test entirely. 6377 can collocate with DC Bias. The friendly operation interface design is in synchronization with the international trend and easy to operate to import into the production lines quickly. Synchronous tests with multiple parameter settings. Because of the high-precision values of measured data and superior efficacy, it must be a necessary testing instrument of components and materials. It supports the interfaces of RS232, LAN, USB and GPIB PC connections.

      • Basic accuracy up to 0.1%
      • Synchronous tests with multiple parameter settings
      • Graphic scanning analysis function
      • Measurement of wide range of functions: Freq. to 5 Digits, signal level of 10mV to 2Vrms
      • Collocating DC Bias to progressing current scanning analysis
      • Fixture design capabilities, Specific customized services for clients
      • Optional Meter Link automatic test software exclusively for LCR power meter series to achieve fast electronic management

      Product Specification:

      Measurement Data

         
      Test Frequency 20Hz-1MHz
      Points Of Test Frequency Continuity
      Basic Accuracy ± 0.1%
      AC Drive  Level 10mV to 2Vrms (1m Vrms steps)
      DC Drive  Level 0.01V~2V
      Output Impedance 100Ω
      Frequency trimming resolution 5 Digits
      Frequency output accuracy ± 0.01%
      AC test speed (Max.) 75mS
      AC test speed (Fast) 150mS
      AC test speed (Medium) 450mS
      AC test speed (Slow) 600mS
      DC test speed (Max.) 30mS
      DC test speed (Fast) 60mS
      DC test speed  (Medium) 120mS
      DC test speed  (Slow) 500mS
      DC Bias Current Source Option (Model 6220)

      Specifications

         
      Measured Value Detection Mode Define upper and lower thresholds according to main and sub parameters
      ESR Series/Parallel
      Mathematical Mode Absolute/Percentage
      Test Range Automatic/Lock
      Indicator Pass/Fail/Bias LED and Built-in speaker
      Output Terminal BNC connector
      Safety EN61010-1
      Immunity EN61326-1
      Emissions EN55022 Class A
      Calibration Open Circuit / Short Circuit: Avoid the misreading caused by the stray capacitance from kelvin clips and fixtures
      Auto-save when power-off function When the power is turned off or encounter a power outage, all the data will be saved automatically and recovered when tester system is switched on again
      Power Supply Voltage 90-132Vac or 198-264Vac (selectable)
        Frequency 47 ~ 63Hz
      Display 320*240 dot-matrix display
      Interface RS-232, GPIB (option), Handler (option)
      Flash Memory Built-in flash for storage of 64 groups of Multi-steps setting (Each group contains up to 30 steps)
      Operation Auto、Manual、RS-232、GPIB (option)、Handler (option)
      Environment Temperature : 10°C to 40°C Humidity : 20 ~ 90%
      Dimension (W*H*D) 340x133x525 mm
      Weight 6.5 Kg

      Parameters Measurement Ranges

         
      |Z| R X 0.1 mΩ – 100MΩ
      |Y| G B 10nS – 1000S
      Cs Cp 0.01pF – >1F
      Ls Lp 0.01nH – 100KH
      D 0.00001 – 9.9999
      Q 0.1 – 9999.9
      DCR 0.1mΩ – 100MΩ
      Δ% -999.99% – 999.99%
      Θ -180° – +180°

      Applications

      Resistance, Capacitance, Inductance, Oscillators, Sensors, Delay Line, Filters, Resonators

Kapat